Materials:
Bodies:                Brass with gold (stainless Steel body SMA available) ; nickel or white bronze plating
Center Contact    Male-Brass with Gold Plating 30 micro inches
                            Female-Beryllium Copper with Gold Plating 30 micro inches
Insulator:             Teflon
Crimp Ferrules:    Brass with gold , nickel or white bronze plating 

Specifications:
Impedance:           50 ohms
Frequency Range:0 to 12.4 GHz
Working Voltage: RG-178 = 170Vrms at sea level max.
                             RG-174, 188, 316 = 250 Vrms at sea level max.
                             RG-58 = 335 Vrms at sea level max
Insulation Resistance:  5000 Megohms min.
                             RG-178 = 500 Volts rms min.
DWV:                   RG-174, RG188, RG316= 750 volts rms min.
                             RG-58 = 1000 olts rms. min.
VSWR :                Straight connector: RG178 = 1.20 + 0.025F (F in GHz)
                             RG174, 188, 316= 1.15 + 0.02F (F in GHz)
                             RG58 = 1.15 + 0.01F (F in GHz) 
                             R/A connector: RG178= 1.20 + 0.03F (F in GHz)
                             RG174, 188, 316= 1.15 + 0.03F (F in GHz)
                             RG58= 1.15 + 0.02F (F in GHz)  

Part No :	Description : (click picture for drawing or contact us (custom made spec available))
	SMA-100  SMA PCB Mount Receptacle-Jack: DC- 6Ghz VSWR test report *Or SMA PCB Jack Low profile, length:10.9mm; 4 ground leg 1.2mm
	RP SMA-D100  (center pin male) RP (reverse polarity) SMA Vetical PCB Receptacle-Jack
	21031  (SMT) SMA vertical straight SMT PCB JACK; 400 pcs in tape & reel packing
	24371  (SMT + through hole) SMA vertical straight PCB SMT + through hole, gap 0.1mm.
	20-002AA  (SMT) SMA vertical straight PCB Jack SMT
	SMA-101 SMA STRAIGHT PLUG FOR P.C. BOARD *Or SMA STRAIGHT PLUG PCB ground leg 2.5mm
	RP SMA-D101  RP SMA Straight Plug Edge mount Receptacle (PCB End Launch plug, thickness 0.8mm) *Or RP SMA PCB End Launch plug, thickness 1.25mm
	SMA-102 SMA Right angle PCB mount Receptacle -Jack: 1k pcs 6.7kg G.W. *Or RP SMA R/A Jack PCB, L=15mm *or Zinc Alloy body for cost down
	SMA-111 SMA Jack Right angle PCB mount Receptacle, length 19mm long thread with washer & nut
	SMA-103 SMA Right angle PCB mount Receptacle-Plug
	RP-SMA-D101-410a (center pin male) RP (reverse polarity) SMA Right Angle bulkhead Jack with or w/o circular ring, Length: 19.69mm PCB mount Receptacle, 1k pcs/G.W. 9kg.
	RP SMA-D103 RP (reverse polarity) SMA Right Angle Jack PCB mount Receptacle, length: 15mm *or Zinc Alloy body for cost down
	RP SMA-22652 RP (reverse polarity) SMA Right Angle Jack SMT PCB mount Receptacle, length: 15mm
	SMA-105 PCB SMA edge mount Receptacle-Jack TENON (recommended SMA-107)
	SMA-106 (L=17.4mm) PCB SMA straight edge mount Receptacle-Jack (PCB End Launch Jack), 0.8mm. :Option: *center pin 3mm, 4 Ground leads 3 mm :Option: *center pin 1.2mm, 4 Ground leads 2.5mm *Or SMA PCB end launch jack, 1.6mm PCB thickness **Or RP SMA PCB End Launch Jack, L=17.4mm for PCB 1.6mm (center pin male) SMA-21047 (L=13.3mm) SMA straight edge mount Jack, PCB pitch: 1.25 mm.
	SMA-107 SMA Straight JACK edge mount, 1.6mm thickness PCB Receptacle (recommended) (PCB End Launch Jack: 0.8mm or 1.6mm) VSWR test report *Or SMA straight jack end launch pcb SQUARE base: 1.7mm **Or R.P. SMA PCB End Launch Jack, L=11.4mm, (center pin Male) ***Or RP SMA straight jack end launch pcb: pitch 1mm
	SMA-108 SMA Straight PLUG PCB Mount Receptacle
	SMA-117 SMA Straight JACK EDGE MOUNT PCB Receptacle
	SMA-303 SMA Straight Bulkhead Receptacle-Jack
	SMA-304 SMA Straight Jack BULKHEAD PCB Receptacle
	SMA-400 SMA Panel Receptacle 2-Hole, FLange Mount-Plug
	SMA-401 SMA Panel Receptacle 4-Hole, FLange Mount-Plug solder pot terminal
	SMA-402 SMA Panel Receptacle 2-Hole, FLange Mount-Plug
	SMA-404 SMA Panel Receptacle 2-Hole, FLange Mount-Plug with solder pot
	SMA-406 SMA Panel Receptacle 2-Hole, FLange Mount-Plug (Exposed Teflon)
	SMA-501 SMA Panel Receptacle 4-Hole, Flange Mount-Jack (Exposed Teflon) * RP (center pin male) SMA Panel Receptacle 4-Hole, Flange Mount-Jack (Exposed Teflon)
	SMA-503 SMA Panel Receptacle 2-Hole, FLange Mount-Jack; for cable end, refer to sma-702. * SMA Panel Receptacle 2-Hole, FLange Mount-Jack Body Silver plating
	SMA-505 SMA Panel Receptacle 4-Hole, FLange Mount-Jack *or SMA panel 4 hole jack with solder pot terminal *or Stainless SMA female panel 4 holes with terminal tab
	SMA-508 SMA Panel Receptacle 2-Hole, FLange Mount-Jack
	SMA-513 SMA Straight JACK PANEL RECEPTACLE With 2 Hole & Exposed Teflon *or R.P. SMA straight jack panel with 2 hole & exposed teflon
	SMA-519 SMA Straight JACK PANEL With 4 Hole Receptacle *or custom made SMA female 25.4mm square flange, larger panel hole
	SMA FOR FLEXIBLE CABLE:
	SMA-600 SMA R/A Braid Crimp Solder Contact- Plug for RG-174, 188, 316;  *for RD316 cable *Or SMA R/A with passivated stainless body, nut, body cap, for RD316
	SMA-603 SMA Right Angle plug for RG-58/U (1k pcs, 7kg) *Or  SMA plug right angle for RG-223 cable. **Or  SMA right angle plug for RG-400U cable.
	RP SMA-D603 (cente pin female) Reverse-Polarity SMA Right angle male for RG-58
	SMA-601 SMA Braid Crimp-Plug for RG-58, RG141, RG142, RG400 *for  SMA straight plug RG-223 cable. *for RG174, 316 refer to SMA-605.
	RP SMA-D700 (center pin female) RP-SMA staight plug for RG-58U *for  RP SMA straight plug RG-174, RG-188, RG-316U cable.
	RP SMA-D601 RP SMA straight Crimp-Plug for Times LMR-200. (For RG-58U, 174U, refer to RP SMA-D700)
	SMA-605 SMA Braid Crimp-Plug for RG-174, 188, 316 VSWR test report *for SMA striaght Crimp-Plug for RD316 cable
	SMA-606 SMA Straight plug semi-rigid for RG 405 (.085") or RG 402 (.141")  *or with SMA plug semi rigid RG402 passivated stainless steel Hex nut  **Reverse Polarity (RP) SMA Straight plug semi-rigid for RG 402 (.141")
	SMA-607 SMA R/A plug crimp Semi-Rigid for RG 402 (.141");  *or for RG-405 (.085")  **or with SMA R/A plug crimp passivated stainless steel Hex nut  ***or All frequency from 0 - 12.4 Ghz with return loss of -15 db testing report
	SMA-608 SMA straight BULKHEAD jack for Semi-Rigid for RG 402 (.141");  or for RG-405 (.085")
	SMA-610 SMA Plug Hand Set
	SMA-707E SMA CLAMP plug for RG8u cable
	SMA-700 SMA Straight Jack Crimp for RG174, RG188, RG136U * for SMA Straight Jack Crimp RG-58U, 141U cable.
	SMA-701 SMA Straight Bulkhead Jack Crimp for RG174, 188, 316U cable * for SMA Straight Bulkhead Jack Crimp RG-178, 196/U cable ** for SMA Straight Bulkhead Jack Crimp RG-58 U cable. ** for SMA Straight Bulkhead Jack Crimp RG-400U cable. *** for SMA Straight Bulkhead Jack Crimp RG-402 U cable.
	RP SMA-D701 (center pin male) Reverse-polarity SMA Straight Bulkhead jack Crimp for RG-58u * For RP SMA straight bulkhead jack RG-174, 188, 316/U cable.  : Option: IP65 ~ IP67 water proof R.P. SMA straight bulkhead jack crimp 1.13mm cable, O ring.  D704: Short length 17.4mm: RP SMA chassis mount bulkhead jack RG174.
	SMA-702 SMA Straight Jack flange 2 hole For semi-rigid RG405/U (.085") cable * For RG-402/U cable
	SMA-703 SMA Straight Jack flange 4 hole for semi-rigid RG405/U (.085") cable * For RG-402/U cable
	*RP (Reverse Polarity) SMA Straight Jack flange 4 hole for semi-rigid RG402/U
	SMA-708-equivalent SMA Adapter, right angle male to female: 0 ~ 6 Ghz OR SMA-808: 0 ~ 12.4 Ghz with V.S.W.R.: 1.4
	SMA-723-equivalent SMA terminator, 50 ohm dummy load (Also refer to SMA-900 for body gold)
	SMA-900 SMA Straight plug terminator, dummy load, for 1/3W resistor, Body gold plated, VSWR: 1.35 Max. *or Reverse Polarity SMA-Plug 50 Ohm Terminator ** option SMA plug 2W terminator, dummy load, DC ~ 6 Ghz ;V.S.W.R. test report
	SMA-800 SMA plug to sma plug Adapter
	SMA-801 SMA jack to sma jack Adapter * D-802: Reverse Polarity SMA Jack (center pin male) to SMA jack adaptor.
	SMA-722 SMA female to SMA Female Bulkhead panel mount adaptor. * SMA-307: SMA straight Bulkhead jack (14.5mm) to SMA straight jack adapter, total length: 22.1mm. .
	SMA-504 SMA 4 hole square flange Mount-Jack-Jack Adaptor
	SMA-806 SMA quick fit plug (without thread for quick testing) to sma jack, gold plating body * D-800: Reverse Polarity SMA Plug quick fit to SMA jack adaptor.  ** D-805: RP SMA Plug quick fit to RP SMA jack adaptor.
	SMA-9702 SMA Jack to MCX Jack adaptor
	SMA-9703 SMA Jack to MCX Jack adaptor
	SMA-811 SMA Jack to MMCX straight Plug adaptor
	SMA-812 SMA Jack to MMCX Straight Jack Adaptor
	T-800 RP TNC plug to SMA plug adaptor, Body gold plated
	T-801 RP TNC jack to SMA plug adaptor, Body gold plated * RP TNC Jack to RP-SMA plug adaptor.
	T-802 RP TNC plug to SMA Jack adaptor, Body gold plated * RP TNC plug to RP-SMA jack adaptor.
	T-803 RP TNC Jack to SMA Jack adaptor, Body gold plated
	SMA-9001 N Female To SMA Female adaptor, stainless steel body, DC~18 Ghz, VSWR: Max 1.2:1 :Option: N Female bulkhead to SMA female adaptor, brass body
	SMA-9002 N Female To SMA male adaptor, stainless steel body, DC~18 Ghz, VSWR: Max 1.2:1
	SMA-9003 N Male To SMA female adaptor, stainless steel body, DC~18 Ghz, VSWR: Max 1.2:1
	SMA-9004 N Male To SMA Male adaptor, stainless steel body, DC~18 Ghz, VSWR: Max 1.2:1
	SMA-9005 N feMale To RP SMA feMale adaptor, stainless steel body, DC~18 Ghz, VSWR: Max 1.2:1
	Miniature IPAX (U.FL or Hirose) connectors to SMA Adapters:
	SMA coaxial fixed Attenuator (signal level adjustment & impedance matching): *Frequency Range : DC ~ 6 GHz, 50 ohm, 2 watts rating. *Attenuation Values : 1 ~ 10db, 15db, 20dB, 30 dB, 40dB, 45dB, 50dB. *Attenuation Accuracy : +- 0.5 dB max. (1~ 20 dB) ; +- 0.8 dB max. (30 dB) *VSWR : 1.2:1 max. (DC ~ 4 GHz) ; 1.3:1 max. ( 4 ~ 6 GHz ). Model Number with VSWR Testing Reports (300 Khz ~ 6 Ghz):
	SMA Male to SMA female DC BLOCK (Test & measurement; communication systems): *Frequency Range : DC 0.1 Ghz ~ 8 GHz, 50 ohm, 2 watts rating. *Insertion Loss : 0.6 dB max. *Voltage Rating : 50 Vdc max. *VSWR : 1.3:1 max.
	SMA RF power switch jack: 970710 *No RF relays needed. *Compact design to simplify PCB layout. *No electrical control needed.
	SMA-34045 RF SWITCH test probe SMA connector
	SMA female power splitter (divider) 2 way: 6105: *Frequency Range : 2 ~ 6 GHz, 50 ohm. *Insertion Loss : 0.8dB (max) ; Outpout Isolation : 22dB (min.) *VSWR : Sum port : 1.35 max. ; J1, J2 port: 1.3 max. *Amplitude balance : 0.3dB (max.) ; Phase Balance : 1.5 deg (max.) *Maximum input average power in splitter application & assuming single carrier: 15 Watts @ loads VSWR < 1.5 : 1 5.5 Watts @ loads VSWR < 2.0 : 1 2.5 Watts @ loads VSWR < 3.0 : 1
	Custom designed kabel assembly available: (RP sma kabel assembly) N-Female straight to Reverse Polarity SMA-Female R/A, RG-58u, L=6 inch Go to: RF Cable Assemblies
	Custom body with SILVER plated 100 Micro inch
	SMA 75 ohms series
	SMA-40101 SMA 75ohm, R/A, jack PCB RECEPTACLE: 0 - 3 ghz
	SMA-40201 SMA 75 ohm straight PLUG CRIMP TYPE FOR BELDEN 1855A CABLE